In their ongoing effort to pack more computing power into less space, chip manufacturers are adopting scaling approaches that extend designs and stack components vertically—a major shift from the drive to shrink features horizontally that has dominated the industry for decades. This is especially true for memory devices like 3D NAND. To ensure the performance of these vertical designs, the dimensions of the thick film stacks and the high aspect ratio (tall and narrow) features must be tightly controlled, which requires precise measurement.
Optically based measurement technologies are challenged by these new applications for a couple of reasons. For one, increases in absorption and dispersion degrade optical signals. Also, complex structures that are less accessible to direct visibility require complicated modeling to generate results.
Metior®, Lam’s mass metrology tool, measures thick film stacks, high aspect ratio structures, and buried (hidden) etched features— critical components that enable vertical scaling of the next generation of microchips—faster and more precisely than optical measurement. It can help engineers produce new 3D architectures with higher process yields and less time and money spent on measurement.
Mass metrology can measure changes down to the angstrom (Å) level. An Å is a tenth of a nanometer, roughly half the diameter of a single silicon atom. That is about a millionth of the thickness of a human hair!
The foundation of Lam’s Metior mass metrology lies in the simplicity of the measurement. It derives changes in mass directly from changes in weight and converts to thickness based on the known density of the material and the area covered by the film. No modeling. No complex calculations.
Metior’s ability to measure mass changes with a precision of 30 µg equivalent to a change of 1.8Å for a silicon layer on a 300mm wafer. Importantly, Metior’s sensitivity does not change with layer thickness so that its relative sensitivity (% change in thickness—a parameter often measured for process control) improves for thicker films.

Metior measures mass changes with a precision of 30 µg, equivalent to a change of 1.8Å for a silicon layer on a 300mm wafer.
The advantages of Metior mass metrology are many:
3D NAND memory is an extreme example of vertical integration. The memory matrix, which in conventional designs is a two-dimensional horizontal array, becomes a three-dimensional array with memory strings arranged along vertical channel holes.

3D-NAND memory devices incorporate thick, many-layered ONON stacks. Current generation devices use 176 ON pairs, and the next generation will go to 232 pairs.
Stack deposition is followed by etching to form various high aspect ratio (HAR) trenches and holes, which are often hidden and difficult to measure. Mass metrology monitors and controls HAR etch processes by:
In 3D NAND, the memory channels are lined and filled with concentric layers of various materials. The diameter and profile of the channel and the thickness of the liners are critical for proper device functionality.
Most of the liner mass is deposited on the vertical channel walls, which multiplies the sensitivity of the mass metrology measurement—a small change in liner thickness causes a large change in mass. Mass monitoring of liner deposition processes can help process engineers by:
Other applications of mass metrology in semiconductor manufacturing processes include:
The applications mentioned for the Lam Metior mass metrology technique are applicable for many technologies including logic, memory, power devices, and CMOS image sensors. Metior provides precise, reliable, high-throughput inline monitoring and control of film thickness, etch-rate, and other critical parameters across a wide variety of wafer-processes. Its ability to measure thicker film stacks, higher aspect ratio structures, and buried (hidden) etched features will be increasingly valuable as the industry continues to scale vertically
Hendrik Hans is a business development director in CSBG